002717_shop
Design felt 240 sold by the meter, specific weight 0.30 kg/cdm, 3 mm or 5 mm thick
Our designer felt fabric sold by the meter can cover a wide range of possible uses and is very environmentally friendly!
You can choose between a length of 1 - 10 meters and a thickness of 3 and 5 mm!
Due to production reasons, some qualities may have a needle edge across the width (holes on the edge). The minimum usable width is the width between the needle edges. However, this can also be wider or narrower due to production reasons.
According to DIN 61200, there are different degrees of hardness for the different raw densities of the felt. The hardness of a milled wool felt indicates its resistance to pressure and deformation. It grows with the raw density, although a comparison is only possible if the felt qualities are the same.
It is divided into
- W2-W5 'Soft' (specifically 0.10-0.16) e.g. for upholstery,
- M1-M6 'Medium' (specifically 0.18-0.30) e.g. for upholstery,
- F1-F5 'Solid' (specifically 0.32-0.48) e.g. for seals, wipers or for lubrication and
- H1-H5 'Hard' (specifically 0.52-0.68) e.g. for polishing.
The sheep's wool used has been cleaned, felted and dyed and feels very soft after production. Nevertheless, the felt is firm to the touch and resilient. It insulates the heat/cold and, for example, protects your table from the heat of the pot as a coaster.
Do you pay particular attention to quality, durability and environmental friendliness? Then choose our product, which clearly stands out from the cheap products made of synthetic felt that you can buy everywhere in discount stores or on the Internet!
The color used corresponds to the Oeko-Tex 100 standard.
Material type:dyed wool felt (= design felt)
Material composition:100% wool
Width:1.70 m, other widths available on request (maximum width of the bale approx. 1.70 m)
Length:1 m, 2 m, 3 m, 4 m, 5 m, 6 m, 7 m, 8 m; other lengths available on request
Thickness:5 mm thick
Density:0.30 kg / dm³ (solid, other densities available on request)
Weight per square meter in grams:not specified
Adhesive type:without glue
Adhesive strength:without adhesive (self-adhesive version available on request)
Temperature resistance:up to 100°C
Sound absorption coefficient:not specified
Thermal conductivity:not specified
Fire protection class:not specified
Color availability:various, see color selection
Durability and resistance to aging:Highly dependent on usage, usually many years
We ship your order reliably and quickly:
Please note:
Wool felt and Camper felt sold by the meter are non-returnable. These products are custom-cut to order and therefore cannot be reused.
Filz hat gute Qualität, die Schnittkanten sind leider nicht gleichmäßig geschnitten :(
der filz lässt sich gut verarbeiten mit guter klebekraft auf kunststoff. gute qualität,optisch einwandfrei. leichter klebstoffgeruch, wird aber schnell besser.
versand könnte schneller sein
Als Türandichtung nicht geeignet, da es zu wenig flexibel ist. Es lässt sich auch sehr schwer und nicht rückstandsfrei wieder von der Oberfläche lösen.
super schneller Versand von Muster Wollfilz,ntille Qualität,
Ich kann diesen shop nur empfehlen
Komunikation top
Versand superschnell
Ware 1a
Sogar sonderwünsche wurden erfüllt.
Vielen dank dafür!