Felt sold by the meter Design felt (approx. 100% wool), brown, specific weight 0.30 kg/cdm, minimum usable width 1,800 mm, 5 mm thick, 2 running meters

Design felt 240 sold by the meter, specific weight 0.30 kg/cdm, 3 mm or 5 mm thick

Our designer felt fabric sold by the meter can cover a wide range of possible uses and is very environmentally friendly!
You can choose between a length of 1 - 10 meters and a thickness of 3 and 5 mm!

Due to production reasons, some qualities may have a needle edge across the width (holes on the edge). The minimum usable width is the width between the needle edges. However, this can also be wider or narrower due to production reasons.

According to DIN 61200, there are different degrees of hardness for the different raw densities of the felt. The hardness of a milled wool felt indicates its resistance to pressure and deformation. It grows with the raw density, although a comparison is only possible if the felt qualities are the same.

It is divided into
- W2-W5 'Soft' (specifically 0.10-0.16) e.g. for upholstery,
- M1-M6 'Medium' (specifically 0.18-0.30) e.g. for upholstery,
- F1-F5 'Solid' (specifically 0.32-0.48) e.g. for seals, wipers or for lubrication and
- H1-H5 'Hard' (specifically 0.52-0.68) e.g. for polishing.

The sheep's wool used has been cleaned, felted and dyed and feels very soft after production. Nevertheless, the felt is firm to the touch and resilient. It insulates the heat/cold and, for example, protects your table from the heat of the pot as a coaster.
Do you pay particular attention to quality, durability and environmental friendliness? Then choose our product, which clearly stands out from the cheap products made of synthetic felt that you can buy everywhere in discount stores or on the Internet!
The color used corresponds to the Oeko-Tex 100 standard.